Meaning
Severe physical deformation applied via heavy mechanical force evaluates structural integrity and short-circuit containment of energy storage hardware under impact conditions. Subjecting a cell or module to mechanical crush simulates severe vehicle collision forces that breach protective outer housing layers. Standardized test protocols mandate pressing rounded or flat impact plates into test items until target force levels or percentage displacement thresholds occur.
The test measures structural resistance, internal short-circuit onset, voltage drop and thermal runaway behavior during and after impact. The scope stops at static and dynamic mechanical intrusion, excluding ballistic penetration or drop impact scenarios.
Force Profile
Hydraulic actuators drive shaped punch tools into fully charged battery cells at controlled speeds. Internal separator layers collapse under load, bringing cathode and anode materials into direct contact. Internal short circuits generate rapid localized heating, potentially triggering thermal runaway.
Breach Threshold
Regulatory standards demand that cells withstand specified deformation levels without catching fire or venting toxic gases. Test chambers monitor force displacement curves, internal temperature and voltage drops continuously. A sharp drop in cell voltage during displacement indicates separator rupture and internal shorting.
Post-test observation periods verify that no delayed thermal reaction occurs hours after load removal.
Compliance Verification
Procurement teams require test certificates from accredited laboratories before approving cell designs for automotive production. Physical test reports confirm structural safety margins and validate mechanical simulation models. Inadequate resistance to mechanical crush forces rejection of cell geometry or mandates costly pack-level structural reinforcement.