Meaning
Mechanical failure of the thin porous membrane separating the anode and cathode represents a critical breakdown of cell isolation. Occurrences of separator fracture allow direct physical and electrical contact between opposing electrodes, leading to internal short circuits. This failure mode can be triggered by external mechanical impacts or by the internal growth of lithium dendrites.
Failure Mechanism
Local stress concentrations develop when active material particles swell or when foreign metallic contaminants pierce the membrane. As the polymer or ceramic separator is stretched beyond its tensile limit, microscopic tears expand into macroscopic cracks. This breach allows localized ionic currents to rise rapidly, concentrating heat and current in a small area.
Structural Cause
Manufacturing defects, such as uneven pore distribution or thickness variations, can predetermine the location of a tear. Mechanical compression applied to the cell during assembly can also exceed the compressive strength of the separator if the pressure is not distributed evenly.
Safety Consequence
Rapid thermal runaway occurs when the direct electrical short circuit releases the stored chemical energy of the cell in a few seconds. To prevent these catastrophic events, separators are often reinforced with ceramic coatings that maintain their structural integrity even at temperatures exceeding two hundred degrees Celsius. This coating acts as a physical barrier that prevents the electrodes from contacting each other even if the underlying polymer base shrinks or melts under intense heat.